Eco - Friendly Resin Dental 3D Printer 1.5KW Rated Dissipation Zero
The same is to correct the teeth, invisible braces have gradually
replaced the wire braces, becoming the mainstream choice for
consumers. If you want to have orthodontics, you will not hesitate
to choose invisible braces. After all, the image and feel of the
full-mouth wire is really horrible, and the invisible braces are
transparent, smooth and easy to care.
Invisible braces are a new 3D stereoscopic computer technology,
tailored to a series of almost invisible transparent braces to
complete the entire correction process. Whether it is due to
crowded teeth, gaps, or teeth that are displaced after traditional
treatment, you can definitely regain a bright smile.
What you should know is that the 20-year history of invisible
braces is based entirely on 3D printing. The maturity of 3D
printing technology provides precision prototypes for invisible
braces, and the invisible braces have reliable technical support.
Only 3D printing can guarantee low cost, high precision and high
efficiency. Therefore, the demand for 3D printers in the dental
industry is also increasing. Next, Jinshi 3D reveals the process of
making invisible braces.
Wire braces and invisible braces
1. The doctor takes a picture of the patient's teeth, takes a CT
piece, and acquires the initial model of the tooth by occlusion.
According to the model, the computer obtains 3D data and obtains a
specific correction plan through specific orthodontic software.
Dynamic demonstration of orthodontic 3D program
The figure above shows the different forms of orthodontics. There
is a slight difference between each form. One millimeter of
correction often has to be corrected ten times, which means that
the accuracy of the braces must be as high as 0.1 mm or more. Every
small mistake will affect the accuracy of the braces, otherwise the
patient will not be able to get a good correction. The use of CNC
cannot guarantee accuracy, and it is more unrealistic to use manual
repair, which will cost a lot of money.
3D printing dental mold
2. According to the 3D data obtained by different forms of
orthodontic treatment, the dental model is made by using the Jinshi
3D printing equipment, and then the corresponding invisible braces
are produced according to the 3D printing dental mold, and the
complete personalized dental correction program corresponding to
the patient is implemented.
A patient's orthodontics often requires dozens or even hundreds of
invisible braces, and each pair of braces is personalized. With the
KINGS light-curing 3D printer, it is possible to mass-produce
dental molds in batches. The patient's tooth data is obtained on
the same day, and all tooth models can be made the next day. In the
process of cooperation with the invisible braces factory, Jinshi 3D
developed high temperature resistant raw materials to ensure that
the 3D printing dental mold will not be deformed during the
production of invisible braces. This not only saves huge costs for
invisible braces manufacturers, but also increases efficiency by
more than 10 times.
So, what is the process of making invisible braces? A brief summary
is the steps: initial diagnosis of teeth, modeling, modeling,
determination of dynamic corrections, design of dental model 3D
data, printing of dental models, and production of invisible
braces. The step of printing the tooth model is done by a 3D
printer, and it can be said that it is difficult to produce
invisible braces without a 3D printer.
3D printing mass production tooth model